Propper Starter™ Condensed Wort Can

Propper Starter™ Condensed Wort Can

Propper Starter™ is condensed wort in a can, allowing you to make a yeast starter in minutes! No need to make a mess in the kitchen measuring out DME, and no need to waste time boiling and cooling before you pitch your yeast. Simply open a can of Propper Starter™, pour it into your flask along with 16 oz of bottled or distilled water, then add your yeast. It's that simple!

One can of Propper Starter™ with 16 oz of water will make a 1L starter with a gravity of 1.040. It is recommended to use the 1:1 dilution rate, regardless of the original gravity of your wort.

Making a proper yeast starter will offer higher cell counts at the time the yeast is pitched, leading to faster, healthier fermentations and better tasting beer! They're especially recommended for lagers and any beer that has an original gravity of 1.060 or higher.

Instructions:

• Sanitize flask, stir bar, top of can and yeast pack
• Swirl and open can, then pour contents into flask
• Add 16 oz of bottled or distilled water to flask
• Pitch yeast and swirl flask to mix
• Add stir bar to flask, cover with foil, and mix on stir plate*

Recommended Use:

• For high gravity beers (1.060 OG or higher)
• For cold pitching lagers
• For yeast packs that recommend a starter
• For yeast packs nearing expiration

Ingredients: water, barley malt extract, yeast nutrient

Shelf life of 24 months. Refrigeration not required.

*Note: the use of a stir plate is not required for making a yeast starter, but is highly recommended, as it will further increase cell count through continuous aeration.